|
 |
|
City Borehole
Pumps
City 4in and 6in submersible borehole pumps are
available in more than 100 models, with motor power up to 40 HP. They
rely on quality and value-for-money to maintain their place in the World
market.
Now their full range - from 1 cubic meter per hour to
60 cubic metres per hour with heads of over 500 metres - is available
to drillers and installers in the UK, exclusively through Amos Pumps.
Single and three-phase versions are available, with
up to 3 HP for single phase motors and 40 HP for three
phase. All accessories are supplied, including a waterproof heat-shrink
cable joint, and, with single-phase models, Amos Pumps own easy to install starter
box containing start capacitor and overload cut-out with manual reset.
Amos Pumps also offer a low-level control box, cable and probes
for use where there is a risk of damage through dry-running, and a full
range of optional extras, making it easy for installers to be sure of
all they need from one reliable source.
|
|
Low-level Control Boxes
Amos' spacious single-phase and three-phase
control boxes feature DIN-rail component mounting to ensure easy access
and component replacement if needed. Capacitor is included, together with
spare terminals so that float switches or pressure sets can be wired in.

The Amos Pumps built and designed low-level control box, centre right,
with probes, borehole pump cable, support rope and standard borehole pump
control box
Motor replacement service
Borehole pump breakdown can lead to loss of
production for industrialists and crop damage for growers. Frequently,
the problem is traced to motor burn-out, leaving the pump itself still
in good condition.
Amos Pumps are saving their customers cash and downtime
by offering a speedy motor replacement service for units designed to NEMA
standards. Contact our sales office for details.
|
|
| |
Borehole pumps suitable for 4 inch boreholes |
Click for Downloads |
Pump model |
Best efficiency point |
Motor power |
Maximum head in metres |
Delivery BSP female |
Number of models |
|
1SP |
1 cu m per hour |
0.33 HP to 3 HP |
362 at 5 litres/min |
1.25in |
7 |
|
2SP |
2 cu m per hour |
0.5 HP to 5.5 HP |
465 at 10 litres/min |
1.25in |
8 |
|
4SP |
4 cu m per hour |
0.75 HP to 10 HP |
495 at 20 litres/min |
1.25in |
9 |
|
6SP |
6 cu m per hour |
0.75 HP to 10 HP |
365 at 25litres/min |
2in |
9 |
|
8SP |
8 cu m per hour |
1 HP to 10 HP |
272 at 40 litres/min |
2in |
8 |
|
10SP |
10 cu m per hour |
1.5 HP to 10 HP |
216 at 50 litres/min |
2in |
7 |
|
12SP |
12 cu m per hour |
1.5 HP to 10 HP |
176 at 50 litres/min |
2in |
7 |
|
15SP |
15 cu m per hour |
2 HP to 10 HP |
145 at 50 litres/min |
2in |
6 |
| |
Borehole pumps suitable for 6in boreholes |
| |
Pump model |
Best efficiency
point |
Motor
power |
Maximum head
in metres |
Delivery
BSP female |
Number
of models |
|
9SP |
9 cu m per hour |
3 HP to 15 HP |
317 at 50 litres/min |
3in |
7 |
|
12SP |
12 cu m per hour |
3 HP to 20 HP |
371 at 50 litres/min |
3in |
9 |
|
18SP |
18 cu m per hour |
5.5 HP to 30 HP |
350 at 50 litres/min |
3in |
9 |
|
27SP |
27 cu m per hour |
7.5 HP to 40 HP |
356 at 100 litres/min |
3in |
9 |
|
36SP
|
36 cu m per hour
|
5.5 HP to 30 HP
|
256 at 100 litres/min
|
3in
|
9
|
|
44SP
|
44 cu m per hour
|
5.5 HP to 40 HP
|
228 at 200 litres/min
|
3in
|
10 |
Franklin & City Submersible Pump Motors
Borehole pump motors are stocked in large quantities for immediate despatch, sizes include -
230 volt, single phase, 50Hz. - 0.5hp, 0.75hp, 1.0hp, 1.5hp, 2.0hp & 3.0hp
400 volt, three phase, 50Hz - 0.75hp, 1.0hp, 1.5hp, 2.0hp, 3.0hp, 4.0hp & 5.5hp with a limited number of larger hp.
60Hz are available.
Full range of motor start capacitors stocked, also motor end cables with plugs.
Motor/pump connections are built to NEMA dimensional standards.
Insulation: class F, protection: IP 68, water temperature: up to + 30 degrees centigrade, starts per hour: 25 at regular intervals
Borehole Motor Cable 1.5 & 2.5 sq.mm, HO7RNF, 4 core, stocked on 500 metre drums, part drums of other sizes, all sizes can be supplied in cut lengths. Heat shrink joint kits available to suit cable size. |
Distributor Network
If you require sales, service or maintenance on your borehole pump or even a new borehole with all the pumping and water purification equipment fitted, contact us so we can put you in contact with your local profesional Amos Pumps Distributor.
|
|
|
Amos
Pumps (UK) Ltd, Wendron, Helston, Cornwall TR13 0PY, United Kingdom
Telephone: +44 (0)1326 573341. Fax: +44 (0)1326 572322
|